Dreadbox Erebus V3 Ctrlr panel documentation and instructions
v2.0
Page 19 of 49
Available “From” sources
are the output patch points of the synthesizer plus a few additional
external ones: "Not connected", "Gate output", "Mod Wheel Out", "Filter Envelope Out", "Noise
output", "CV output", "LFO output", "Osc3 output", "Clock output", "VCA Plus output", "VCA Min
output", "S&H output", "Patch X as output", "Patch Y as output", "Patch Z as output ", "Synth1 CV
output", "Synth2 CV output", "Synth1 Gate output", "Synth2 Gate output", "Sequencer track 1",
"Sequencer track 2", "FX output"
Available “To” destinations
are the input patch points of the synthesizer plus a few additional
external ones: "Not connected", "Osc1 CV input", "Osc2 CV input", "Osc3 CV input", "CV All OSC
input", "Osc1 PW input", "Echo input", "Osc3 PW input", "Gate input", "Cutoff input", "Resonance
input", "In/Filter input", "In/Amp input", "Clock Rate input", "VCA input", "VCA CV input", "S&H
input”, “S&H Clock input", "SW Clock input", "Mult1 input", "Mult2 input", "Mult3 input", "Patch X as
input", "Patch Y as input", "Patch Z as input", "Synth1 CV input", "Synth2 CV input", "Synth1 Gate
input", "Synth2 Gate input", “FX input”
Current Program
Clicking the
Author
button opens a popup window where you can modify the name of the author of
the patch. The name should be maximum 15 characters long (will be truncated if longer). If you leave
the Author name empty then a “?“ is displayed.
Clicking the
Synth1
button opens a popup window where you can modify the name of a synth
connected to your Erebus. The name should be maximum 11 characters long (will be truncated if
longer). If you leave the Synth1 name empty then a “-“ is displayed.
Clicking the
Synth2
button opens a popup window where you can modify the name of a second synth
connected to your Erebus. The name should be maximum 11 characters long (will be truncated if
longer). If you leave the Synth2 name empty then a “-“ is displayed.
If you leave the Synth2 name empty then a “-“ is displayed.
Clicking the
FX
button opens a popup window where you can modify the name of a FX chain
connected to your Erebus. The name should be 13 characters maximum long (will be truncated if
longer). If you leave the FX name empty then a “-“ is displayed.
Usage steps
You can manage describe the usage of the program by using up to 15 usage steps. For example:
gradually increase resonance; increase echo time; increase amp release; decrease cutoff… The idea is
to be able to illustrate the usage of your sound in a more live environment.
