7
Next, locate the two push buttons.
WARNING
! They have a polarity that needs to be
respected! If not placed correctly they will be
damaged and removing them is a challenging task!
Check their bottom side. The "+" sign should match
the square pad on the PCB.
Another tip on how to place them correctly is :
The guide on the top should match the small hole
on the PCB, and the long middle lead should match
the cycle pad.
Once you are sure regarding their orientation, push them firmly down to their position.
WARNING!
: If the button is not pushed correctly, it will touch the aluminum panel and this will
not allow it to rest to it's OFF position - or it will not be able to be aligned correctly to the whole
of the panel.
