Dražice OKCE 100 S/2.2 kW Operating And Installation Manual Download Page 22 | Manualshive

Page: 22 / 23

Dražice OKCE 100 S/2.2 kW Operating And Installation Manual Download Page 22

- 22 -

It is not allowed to handle the thermostat, aside from temperature resetting with a control
button.

All electric installation handling, setting, and regulation feature exchange, may only be
implemented by a service company.

Both the electric and water installation must follow and meet the requirements and
regulations relevant in the country of use!

4.2

DISPOSAL OF PACKAGING MATERIAL AND FUNCTIONLESS
PRODUCT

A  service  fee  for  providing  return  and  recovery  of  packaging  in  which  the
water  heater  was  delivered.  The  service  fee  was  paid  pursuant  to  Act  No.
477/2001  Coll.,  as  amended,  at  EKO-KOM  a.s.  The  client  number  of  the
company  is  F06020274.  Take  the  water  boiler  packages  to  a  waste  disposal
place determined by the town. When the operation terminates, disassemble
and  transport  the  discarded  and  unserviceable  heater  to  a  waste  recycling
centre (collecting yard), or contact the manufacturer.

«
...
20
21
22
23
»

Summary of Contents for OKCE 100 S/2.2 kW
























Reviews:

No comments