-
10
-
a)
Temperature of heating water (90/80 °C); hot water temperature (10/60 °C)
b)
Temperature of heating water (70/60 °C); hot water temperature (10/60 °C)
2)
A20/W10
-
54, according to EN16147 and applicable regulation No. 812/2013
TRANSPORT
The appliance must be transported to the installation site in the original packaging and must be
transferred in an upright position. When handling the appliance, proceed with maximum
caution to avoid the collision that could damage any part of the appliance. Make sure that the
transport belts or straps do not cause material damage. For transportation, always use suitable
means of transport (pallet truck, forklift, etc.).
The packaging contains the following information symbols:
INSTALLATION
4.1
SAFETY AND CONTROL DEVICE
4.1.1
Low
-
pressure/high
-
pressure fuse
In preparation for operation outside the recommended operating pressures defined by the manufacturer,
the appliance switches off and the electronic panel displays an error.
4.1.2
Thermal fuse
Thermal fuse is factory set by the manufacturer, and ensures that the water temperature in the hot water
tank does not exceed the maximum value. If the temperature exceeds this value, the fuse shuts off backup
electric heating. Turning on is performed manually by a service technician after analyzing the reasons
for the switching off.
Fragile, handle with extreme caution
Make sure that the arrow always
points upwards
Keep the packaging dry
Do not stack the packaging
