INTRODUCTION
The Lifestyle Programmer will automatically control your
central heating and hot water by switching them on and off at
times that suit you. The two lights on the front of the
Programmer show when they’re on.
PREPARING TO PROGRAM YOUR SYSTEM
As your programmer has a built-in, factory set, clock, there is no
need to set the time. However, should you need to, go to section
“Setting the Clock” page 14.
If the timings haven’t been set for you, then this is how your
programmer has been set at the factory. It’s easy to make
changes. Just go to the section on the program that’s already
been selected – 24-hour, 5/2 day or 7-day – and follow the
simple instructions.
.
Models
Your programmer
is set as
(1)
24-hour
5/2-day
7-day
(1) Model to be ticked by the installer
USER’S INSTRUCTIONS
Instructions for the
model are on page
8
9
12
Your programmer has been set with these standard times.
They’re based on the 5/2-day program, with different settings
for the weekend, and central heating and hot water linked.
5
If the engineer has set your program and timings – you
won’t need to do anything else. Just keep this guide in a
safe place for future reference.
