12
THE 7-DAY PROGRAM
This is where you can have different timings for every day of
the week, if necessary. Just follow the sequence, setting
weekdays first.
Want to leave a timing as it is? Just press SET? and move on
to the next one.
Need to delete your timings and start again? Press ‘SET’ and
‘+’ together to go back to the pre-set program.
If you don’t press anything for two minutes, the programmer
automatically goes back to normal operation.
These instructions are for setting your central heating and hot
water independently, with the possibility of having different
timings for each day of the week. If your settings are linked, then
CH and HW won’t appear in the display and you’ll only need to
go through process once.
Set all weekdays
First you set the times that are going to be the same for each
weekday, then you can select each day individually and make
any further adjustments. If you want each day to be quite
different, go straight to ‘Set each day.’
Press the SET? button and you’ll see ‘SET PROG?’.
Press the YES button, and the display will
ask ‘SET MON to FRI PROG?’
Press YES, and the display will ask ‘SET CH MON to FRI PROG?’
SET
PROG?
PROG?
MON TUE WED THU FRI
PROG?
MON TUE WED THU FRI
CH
