6
SWITCHING
WEEKDAYS
WEEKENDS
ON 1
– start of first timed period
6.30am
7.00am
OFF 1
– end of first timed period
8.30am
9.00am
ON 2
– start of second timed period*
12.00pm
12.00pm
OFF 2
– end of second timed period*
12.00pm
12.00pm
ON 3
– start of third timed period
4.30pm
4.00pm
OFF 3
– final switch-off of the day
10.30pm
11.00pm
* Notice that the second period has the same ON and OFF
times, which means neither your central heating nor hot water
will respond. If you want to activate this middle period, simply
set different ON and OFF times.
Remember:
Make your changes using the SET?, YES/-, and + buttons on
the programmer, found under the bottom flap.
You can’t set ON1 as the last timing before midnight, but you
can set OFF3 after midnight – providing it’s not more than 23
hours and 59 minutes after ON1.
You need to set the timings in sequence – i.e. ON1, OFF1,
ON2, OFF2, ON3, OFF3. If you get out of sequence, the display
will flash a warning.
