Draytek VigorSwitch P1085, User Manual, Page: 236 / 267

VigorSwitch P1085 User’s Guide 228
<1-65535> timeout <1-300>

<config># snmp host <X:X::X:X> traps <NAME> udp-port
<1-65535> timeout <1-300> retries <1-255>

<config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
 <config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
retries <1-255>
 <config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
timeout <1-300>
 <config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
timeout <1-300> retries <1-255>

<config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
udp-port <1-65535>

<config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
udp-port <1-65535> retries <1-255>

<config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
udp-port <1-65535> timeout <1-300>

<config># snmp host <X:X::X:X> version <1/2c/3> <NAME>
udp-port <1-65535> timeout <1-300> retries <1-255>
snmp trap snmp trap - Send the SNMP traps.
auth – Enable the SNMP authentication failure trap.
cold-start – Enable the SNMP cold startup failure trap.
linkUpDown – Enable the SNMP link up and down failure trap.
wort-security – Enable the SNMP port security trap.
Warm-start – Enable the SNMP warm startup failure trap.
Related Syntax:

<config># snmp trap <auth / cold-start / linkUpDown /
port-security / warm-start>
snmp user snmp user - Set SNMP user account.
<username> - Specify a name of SNMP user.
<groupNAME> - Sepcify a name of SNMP group.
auth <md5/sha> - Specify the authentication mode, md5 or sha.
<AUTHPASSWD> - Enter the password for the md5/sha mode.
Pri <PRIVPASSWD> - Enter a password as a privacy key.
Related Syntax:

<config># snmp user <username> <groupNAME>

<config># snmp user <username> <groupNAME> auth
<md5/sha> <AUTHPASSWD>

<config># snmp user <username> <groupNAME> auth
<md5/sha> <AUTHPASSWD> priv <PRIVPASSWD>
snmp view
snmp view - Set the SNMP view.
<NAME> - Enter the SNMP view name.
Subtree <OID> - Specify the ASN.1 subtree object identifier (OID).
oid-mask <mask/all> - Speicfy the OID mask, or use all for all masks.
viewtype <exluded/included> - Let the selected MIBs include or
exclude in the SNMP view.
Related Syntax:

<config># snmp view <NAME> subtree <OID> oid-mask <mask>
viewtype <excluded/included>
E
E
x
x
a
a
m
m
p
p
l
l
e
e
P1085# configure
P1085(config)#
P1085(config)# snmp engineid remote 192.168.2.38 00036D001188