Draytek VigorSwitch P1085 User Manual Download Page 226

Page: 226 / 267

VigorSwitch P1085 User’s Guide

218

mailalert password

<PASSWORD> - Enter the password for SMTP server authentication.
Related Syntax:



<config># mailalert password <PASSWORD>

mailalert poestatus

<disable/enable> - Enable or disable the function of sending a mail
alert when PoE status is changed.
Related Syntax:



<config># mailalert poestatus <disable/enable>

mailalert port

<0-65535>- Enter a port number.
Related Syntax:
<config># mailalert port <0-65535>

mailalert portlink

<disable/enable> - Enable or disable the function of sending an
alert when the port lnik status changes.
Related Syntax:



<config># mailalert portlink <disable/enable>

mailalert portspeed

<disable/enable> - Enable or disable the function of sending an
alert when the port link speed changes.
Related Syntax:



<config># mailalert portspeed <disable/enable>

mailalert receiver

Specify an address for receiving the alart mail.
<ADDRESS> - Enter the email address of the receiver.
Related Syntax:



<config># mailalert receiver <ADDRESS>

mailalert sender

Specify an address which sends out the alert mail.
<ADDRESS> - Enter the email address of the sender.
Related Syntax:



<config># mailalert sender <ADDRESS>

mailalert server

Set the IP address of the server.
<ADDRESS> - Enter the IP address of the SMTP server.
Related Syntax:



<config># mailalert server <ADDRESS>

mailalert sysrestart

<disable/enable> -Enable or disable the function of sending a mail
alert when the system restarts.
Related Syntax:



<config># mailalert sysrestart <disable/enable>

mailalert throughputcheck

<disable/enable> - Enable or disable the function of sending a mail
alert when reaching the throughput threshold.
Related Syntax:



<config># mailalert throughputcheck <disable/enable>

mailalert username

<NAEM> - Enter the username authenticated by STMP server.
Related Syntax:



<config># mailalert username <NAME>

P1085# configure

P1085(config)#

P1085(config)# mailalert receiver [email protected]

Use this command to set VLAN ID for management VLAN.

Summary of Contents for VigorSwitch P1085












































































































































































































































































Search results

Summary of Contents for VigorSwitch P1085

Reviews:

Draytek VigorSwitch P1085, User Manual, Page: 226 / 267

Search results

Summary of Contents for VigorSwitch P1085

Reviews: