Draytek VigorSwitch P1085, User Manual, Page: 199 / 267

VigorSwitch P1085 User’s Guide 191
 <config>#ip dns <A.B.C.D> <A.B.C.D>
 <config>#ip dns <X:X:XX:X:X>
 <config>#ip dns <X:X:XX:X:X><X:X::X:X>
 <config>#ip dns lookup
ip forcedhttps Use this command to enable the function of forced HTTPS
configuration.
Related Syntax:

<config>#ip forcedhttps
ip http Use this command to enable the function of HTTP configuration.
Login – Set login authentication.
<LISTNAME> - Enter the authentication method list name.
Session-timeout – Set the session timeout.
<0-86400> - Set the timeout value. 0 means no timeout.
Related Syntax:

<config>#ip http login authentication <LISTNAME>

<config>#ip http session-timeout <0-86400>
ip https Use this command to enable the function of HTTPS configuration.
Login – Set login authentication.
<LISTNAME> - Enter the authentication method list name.
Session-timeout – Set the session timeout.
<0-86400> - Set the timeout value. 0 means no timeout.
Related Syntax:

<config>#ip https login authentication <LISTNAME>

<config>#ip https session-timeout <0-86400>
ip igmp Use this command to set IGMP profile and enable IGMP snooping
function.
Profile – Set IGMP profile.
<1-128> - Enter the index number of IGMP profile to access into next
phase for configuring detailed settings.
<A.B.C.D><A.B.C.D> - Specify the source and destination IPv4
addresses
action <deny/permit> - Speicfy the rule (deny/permit) for the IGMP
profile.
Related Syntax:

<config>#ip igmp profile <1-128>
<config-igmp-profile># do
<config-igmp-profile># end
<config-igmp-profile># exit
<config-igmp-profile># profile range ip <A.B.C.D><A.B.C.D>
<config-igmp-profile># profile range ip <A.B.C.D><A.B.C.D>
action <deny/permit>
<config-igmp-profile># profile range ip <A.B.C.D> action
<deny/permit>
<config-igmp-profile># show

<config>#ip igmp snooping
ip source Use this command to create a static IP source binding entry.
<A:B:C:D:E:F> - Enter the MAC address for the binding entry.
vlan <1-4094> - Specify the VLAN ID number.
<A.B.C.D><A.B.C.D> - Specify the source and destination IPv4
addresses.
<1-8> - Specify a physical port.
<1-8> - Specify a LAG port.