24
4
4
.
.
3
3
.
.
1
1
P
P
P
P
P
P
o
o
E
E
This connection method will typically be used with a modem such as the Vigor 130
VDSL2 modem, which passes through the PPPoE connection from the ISP to the
router.
1.
Go to
[WAN] > [Internet Access]
Firstly set the
WAN2 Access Mode
to
PPPoE
, then click the
Details Page
button
to proceed:
2.
In the PPPoE settings tab:
Select the
Enable
radio button at the top of the page to ensure that the PPPoE
interface is enabled.
Input the username into the
Username
field and password in the
Password
field, as
required. The Service Name does not need to be specified.
If your ISP has provided a static IP address, that can be specified by setting the
Fixed
IP
setting to
Yes
and entering the IP in the
Fixed IP Address
field.
Click
OK
on that page to save the settings and the router will then prompt to restart,
allow it to restart to properly apply the changes.
Once the router has restarted, log back into the web interface and select
[Online
Status] > [Physical connection]
, if it has connected, the relevant
WAN Interface
status text will be in green along with an IP address which indicates that the
connection is active and ready for use.
