Vigor2860 Series Quick Start Guide
4
1
1
.
.
1
1
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
8
8
6
6
0
0
n
n
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT (Activity)
Off
The router is powered off.
On
USB device is connected and ready for use.
USB
Blinking
The data is transmitting.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On
Internet connection is ready.
Off
Internet connection is not ready.
WAN2
Blinking
The data is transmitting.
On
The router is ready to access Internet through
DSL link.
DSL
Blinking
Slowly: The DSL connection is ready.
Quickly: The connection is training.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
WCF
On
The Web Content Filter is active. (It is
enabled from
Firewall >> General Setup
).
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while detecting an attack.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
WAN2
(Giga)
Right
LED Off
The port is connected with 10/100Mbps
GigaLAN
Left
On
The port is connected.
