5-14
System Management
5.5 Reboot System
The Web Configurator may be used to restart your router. Click
”
Reboot System
” to open the following page.
There are two reboot options:
Using current configuration
and
Using factory default configuration
. If you want to reboot the
router using current running configurations, check
Using current
configuration
and click ”
OK
”
.
To reset the router settings to
default values, check
Using factory default configuration
and
click ”
OK
”.
The router will take 3 to 5 seconds to reboot the system.
5.6 Firmware Upgrade
Before upgrading your router firmware, you need to install the
Router Tools
. The
Firmware Upgrade Utility
is included in the
tools. The following steps will guide you through an upgrade. Note
that the examples below use a Windows OS.
Summary of Contents for Vigor2200 Series
