4-14
Remote Access
-
Require Remote to Callback
:
Inactive by default. When
active, the router exchanges connection information with the
remote router and requires the remote router to call back to
make a connection.
-
Provide ISDN Number to Remote
:
In some cases, the re-
mote router requires the ISDN number for calling back. Check
here to allow the local router to send the ISDN number to
the remote router. The remote router owner will be charged
the connection fee by the telecom.
Dial-In Settings
Username:
Specify an username to authenticate the dial-in
router.
Password:
Specify a password to authenticate the dial-in router.
Enable CLID Authentication:
Limit the dial-in router to be
called from a specific ISDN number.
Peer ISDN Number:
If CLID Authentication is enabled, enter
the remote router's ISDN number in this field
Link Type:
Refer to
Dial-Out Settings
.
PPP Authentication:
Refer to
Dial-Out Settings
.
CVJ Compression:
Refer to
Dial-Out Settings
Callback Function (CBCP):
Checking here allows this router
to accept requests from a remote router for call back.
Enable Callback Function: Checking here to enable this
function. The router owner will be charged the connection
fee by the telecom.
Use the Following Number to Callback
- Callback Number: Check here and enter a callback
number for the router to call.
- Callback Budget: Specify a time budget for the
callback function. By default the budget is set to
zero, which means no call back attempt will work.
