1-5
Getting Started
ISDN Group:
Note:
On some NT1 boxes, the LNK LED will go OFF when the
ISDN line has been idle for a while. When the router is
dialing or answering a call, it should be ON again.
LNK
(Link)
ON when the connected network card or hub has linked up.
Blinking when the Ethernet packets pass through the interface.
B1
ON when there is successful remote connection on the ISDN BRI B1
channel.
B2
ON when there is successful remote connection on the ISDN BRI B2
channel.
LAN Group:
Col
(Collision)
BLINK when there is collision of packets within the Ethernet.
P1 ~ P6
- ON when the computer is connected and has no packet transmission
going.
- BLINK when packets are sending/receiving through hub or connected
computer.
Rear Panel Description
The Vigor2000 has a power jack, an uplink port, six RJ-45 ports, a
console port, and an ISDN port on the rear panel:
