Draytek Vigor 2200V, User Manual

Page: 44 / 143

NAT Setup
5-4
As shown above, the Port Redirection Table provides10 port-mapping
entries for internal hosts.
Service Name Specify the name for the specific network service.
Protocol Specify the transport layer protocol (TCP or UDP).
Public Port Specify which port should be redirected to the internal
host.
Private IP Specify the private IP address of the internal host offering
the service.
Private Port Specify the private port number of the service offered by
the internal host.
Active Check here to activate the port-mapping entry.
Because the router has its own built-in web server for the
configuration, if you want to access to the web configurator remotely
and to a web server behind the router, you need to change the router’s
http “port” to something other than the
default port 80 . You shall
change the admin port from the Management Setup menu and you
then access the admin screen by suffixing the normal IP address of
Vigor router’s web configurator with 8080. e.g.
http://192.168.1.1:8080