Draytek Vigor 2200V, User Manual

Page: 106 / 143

VPN and Remote Access Setup
8-19
if you do not activate the “ Specify Remote Node ” and leave the
field of “ Peer VPN Server IP or Peer ID ” to be empty, the
settings of IKE Pre-Shared Key, and IPSec Security Method ,
will be disabled and, therefore, no IPSec-related VPN
connection can be triggered successfully.
Callback Function won’t be enabled for this version.
TCP/IP Network Settings
My WAN IP
In most cases, you may accept the default value of 0.0.0.0 in
this field. The router will then get a WAN IP address from the
remote router during the IPCP negotiation phase. If the WAN
IP address is fixed by remote side, specify the fixed IP
address here.
Remote Gateway
IP In most cases, you may accept the default value of 0.0.0.0 in
this field. The router will then get a Remote Gateway IP
address from the remote router during the IPCP negotiation
phase. If the Remote Gateway IP address is fixed, specify
the fixed IP address here.
Remote Network
IP
Specify the network identification of the remote network. For
example, 192.168.1.0 is a network identification of a class-C
subnet with subnet mask of 255.255.255.0 (/24).