DRAX REDON RX9200, User Manual

Page: 7 / 24

CENTERING THE BELT _
After the treadmill has been installed and leveled, the belt must be checked to confirm proper tracking.
First, plug the power cord into an appropriate outlet and turn the treadmill ON. The first person stands
on the sides of the treadmill and straddles the belt, not standing on it at this time. Press the Quick Start
key and increase the speed to 4km/h using the Speed up-arrow.
While the treadmill is running, if the striding belt moves to the right, the second person turns the right
tension bolt 1/4 turn clockwise and then turns the left tension bolt 1/4 turn counter-clock-wise(see
figure). This sets the striding belt tracking back to center of roller. If the striding belt moves to the left,
turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counterclock-
wise to start striding belt tracking back to center of roller. Repeat adjustments until striding belt appears
centered. Allow machine to continue running for several minutes to observed if tracking remains stabilized.
NOTE :
Do not exceed one full turn of the adjusting
screws in either direction. If after one full
turn the belt does not track properly, con-
tact Customer Support Services.
6
REDON