Section 13 -
Wiring Diagrams: 220V Standard Motor
Please Note:
Do not wire motors in parallel.
* These wiring diagrams are for Access screens with motor on audience
left
(standard)
, and fabric unrolling from the back of the roller
(standard)
.
Connecting Switch
to Motor with Internal
Low-voltage Controller
Ne
ut
ra
l
L1
220V,
50 Hz.
Dashed wiring
by installer.
Control
switch
Internal Screen Wiring
Blue-220V (Common)
Brown-220V (Down)
Black-220V (Up)
Green/Yellow (Motor Ground)
Single Station Control
CE Approved
220V Motor and Quiet Motor
with Internal Low-Voltage Controller
Internal Screen Wiring
Blue (Neutral)
Brown
Green (Ground)
Dashed wiring
by electrician
To 220V Line
Wall Switches,
RF or IR
Receivers,
or integrated
control systems.
Data
Cables
Back of
Wall Switch
Back of
Wall Switch
Data Cables to
switches or
additional motors
TO MOTOR
TO MOTOR
ILT Data Cable Connection
Back of
Wall Switch
Back of
Wall Switch
Dry Contacts
OR
MOTOR
DATA CABLE
MOTOR
DATA CABLE
Please Note: This Splitter/Jack is located
inside the junction box of your screen.
Please Note: 5V DC must
be connected to set limits
using the wall switch.
Dashed wiring by electrician
Low-voltage wiring by others
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
To
230 VAC
Line
White-Common to screen & 230V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 230V AC-Hot
Black-to 230V AC-Hot
Green/Yellow (Ground)
Blue (Common)
Brown (Down)
Black (Up)
Internal Screen Wiring
Electrically Straight
Data Cable to more
LVC-IV modules.*
*A maximum of six (6)
LVC-IV modules can be
linked together.
N
L1
GND
Location of key
operated 0n-off
switch if furnished.
IR Eye Input
Low-Voltage Trigger
4-28 VDC
RS232/485
Inputs/Outputs
Receiver
Button
Wall Switch
Green/Yellow
(Motor Ground)
FU
SE -
3.
15
AM
P
25
0
VA
C
5x
20
m
m
External LVC-IV - Single or Multiple Projection Screen Wiring Diagram
FUSE - 3.15 AMP
250
V
AC 5x20mm
Receiver
Button
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules.*
*A maximum of six (6)
LVC-IV modules can be
linked together.
IR Eye Input
Low-Voltage
Trigger
4-28 VDC
RS232/485
Inputs/Outputs
Dashed wiring by electrician
Factory wiring
Low-voltage wiring by others
To
230 VAC
Line
Green/Yellow (Ground)
Blue (Common)
Black (Up)
Brown (Down)
Green/Yellow
(Motor Ground)
Location of key
operated on-off
switch if furnished.
Black-to 230V AC-Hot
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 230V AC-Hot
White -Common to screen & 230V AC Neutral
Wall Switch
INTERNAL SCREEN WIRING
GND
L1
N
Internal LVC-IV - Single or Multiple Projection Screen Wiring Diagram
Internal LVC-IV - Single or Multiple Projection Screen Wiring Diagram
External LVC-IV - Single or Multiple Projection Screen Wiring Diagram
220V Motor with Internal Low-Voltage Controller
page 8 of 8
Access XL E and V 220V
