Draper 84713, Instructions Manual

Page: 5 / 28

4. INTRODUCTION
4.1 SCOPE
This machine is designed to cut wood, wood derived materials and plastics by means of a
revolving endless saw band which is carried on two band wheels. The work piece is manual
fed on to the saw band. Any other application is considered mis-use.
4.2 SPECIFICATION
Stock no .............................................................................................................................84713
Part no ............................................................................................................................ BS250B
Motor:
Rated
voltage ....................................................................................................... 230V~
Rated frequency .................................................................................................... 50Hz
Rated input ......................................................................................................... 420W
Revolutions per minute (no load) ................................................................. 1400min
-1
Maximum throat capacity ............................................................................................. 246mm
Table size ............................................................................................................... 300x300mm
Blade speed ........................................................................................................660/960M/min
Band saw blade length ............................................................................................... 1790mm
Dust extraction port ...........................................................................................40mm,100mm
Sound pressure level .................................................................................................. 92.7dB(A)
Sound power level ................................................................................................. 102.3dB(A)
Weight (net) .................................................................................................................... 27.3kg
4.3 HANDLING & STORAGE
Care must be taken when handling and lifting. Dropping this machine will have an effect on
the accuracy and may also result in personal injury. This machine is not a toy and must be
respected.
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.
5