15
9. OPERATING THE BANDSAW
9.1 NO-VOLT ON/OFF SWITCH – FIG. 10
The bandsaw is fitted with a no-volt switch
.
To switch the bandsaw on, push the green
button marked ‘I’.
To switch the bandsaw off, push the red button
marked ‘0’.
In the event of a power failure the bandsaw will
have to be manually re-started.
NOTE:
Removing the plug from the socket before
carrying out adjustment, servicing or maintenance.
9.2 TILTING THE TABLE – FIG. 11
Using the bevel indicator
a
s a guide the angle
of the table can be adjusted between 0º and 45º.
To tilt, loosen the wing nut
. When set, secure .
NOTE:
When greater accuracy is required, make
practice cuts on waste material and adjust the table
as necessary.
FIG.11
FIG.10
Summary of Contents for 84713
Page 26: ...26 16 NOTES...
Page 27: ...27 16 NOTES...