9. ASSEMBLING THE STUD WELDER
9.6
CONNECTION OF NEGATIVE WIRE
1. WeId 2 washers on metal workpiece, as close to
welding area as possible.
10.1 FUNCTIONS
- 14 -
- 15 -
10. STUD WELDER INSTRUCTION
Note:
Time: FFF
The welding time can be set from 0.01 second to FFF.
After 0.99, it will go to FFF, it is an automatic mode for the time between 0.01 - 0.99.
The welding will stop once the preset time has been reached.
When setting the time to 0.1, for example, the welding time will be only 0.1 second
even the trigger has been pressed shorter or longer than 0.1second.
Power FFF is a manual mode.
The welding time depends on how long you have pressed the trigger.
Power: FF
FF means full power 100%.
3. Located the holder on the welded washer.
4. Install the fixed shank.
5. Tighten up the holder.
3.
5.
4.
Picture
Description
Triangle washer welding
Time(s)
0.01 - FFF
0.01 - FFF
0.01 - FFF
0.01 - FFF
0.01 - FFF
0.01 - FFF
FFF
FFF
FFF
FFF
Power
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
25 - FF
Washer welding
OT washer welding
Stud welding
Single-sided spot welding
Wavy wire welding
Sheet metal flattening
Carbon rod stitch welding
Carbon rod heating and shrinking
Carbon rod cutting
