Draper 64261, Instructions Manual, Page: 7 / 12

- 6 -
OPERATION & USE
IMPORTANT - ensure that the machine is
switched OFF before connecting to the power
supply.
ON/OFF SWITCH
The ON/OFF switch has three positions/settings,
(see Fig.1). This shows the switch in the off
position. For low heat switch up to position 1 &
for full heat switch into position 2.
FREESTANDING OPERATION
This hot air gun can be positioned as shown in
Fig.2 using the free standing support plate.
This allows the user to have both hands free
which is essential for
certain applications, eg. pipe bending, plastic
welding etc. Position the hot air gun on it’s end
and position the support foot
✪✌
as shown in
✪✌
Fig.2
Fig.1