Draper 64261 Instructions Manual Download Page 1

• INSTRUCTIONS •

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE

THE SAFE AND EFFECTIVE USE OF THIS TOOL.

2000W HOT AIR GUN

STOCK No.64261                   

PART No.HG2000

12/2000

IMP

OR

TAN

T:

The heating w

ire elem

ent of this hot air

gun has a pr

otective coating.

Please note

that due to the v

aporization of this

coating,

som

e sm

oke m

ay b

e

generated during the fir

st 20-30

seconds of use onl

y.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.

Summary of Contents for 64261













Reviews: