Draper 64261 Instructions Manual Download Page 3

- 2 -

SPECIFICATION

The Draper Tools policy of continuous improvement determines the right to change specification
without notice.

Part No..  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HG2000
Stock No.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64261
Power  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000W
Temperature   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60/590°C
Voltage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V/50Hz
Air flow volume   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300/500 L/min
Weight (machine only)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750g.

IMPORTANT:
Please note this machine is fitted with safety thermal overload protection. If the product, for
example, is used too close to the workpiece - resulting in overheating, the thermal overload
protection will be activated and stop the motor/heating of the machine.
The hot air gun should be switched off and disconnected from the power supply, allowing the
machine to totally cool down - before restarting work.
Remember the nozzle will remain hot for sometime - a safe storage location should be used.

GUARANTEE - 

DOMESTIC DIY POWER TOOLS

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.

Should the tool develop any fault, please return the complete tool to your nearest distributor
or contact Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF.
England. Telephone: (023) 8026 6355.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. The guarantee period covering parts/labours 12 months
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accident, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period .

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

Note: This tool is intended for domestic use only.

Summary of Contents for 64261













Reviews: