background image

BENCH GRINDERS

STOCK No. 29620

PART No. GHD150

29621

GHD200

CONTENTS:

Page No.

Contents/Declaration .......................................................................................1

Specification/Guarantee...................................................................................2

Safety Warning .................................................................................................3

Additional Safety Rules/Power Supply .............................................................4

Getting to know your Bench Grinder ...............................................................5

Unpacking ........................................................................................................6

Assembly ......................................................................................................7-8

Operating Instructions/Grinding Tips ..............................................................9

Changing the Grinding Wheel .......................................................................10

Accessories ....................................................................................................11

We
Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire.
SO53 1YF. England.
Declare under our sole responsibility that the product:

Stock Nos:- 

29620 & 29621.

Part Nos:- 

GHD150 & GHD200.

Description:-

Bench Grinders.

To which this declaration relates is in conformity with the following directive(s)
98/37/EC, 73/23EEC & 89/336EEC.
With reference to: BSEN61029-1 & IEC1029-2-4.

JOHN DRAPER
Managing Director

17/09/2001

DECLARATION OF CONFORMITY

- 1 -

Summary of Contents for 29620

















Reviews: