background image

3. GUARANTEE

– 4 –

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 

free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor  

or contact:
Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023) 8049 4344.
A proof of purchase 

must be provided with the tool.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, 

repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months 

from the date of purchase except where tools are hired out when the guarantee period is 90 days 

from the date of purchase. This guarantee does not apply to normal wear and tear, nor does  

it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents,  

or repairs attempted or made by any personnel other than the authorised Draper warranty  

repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will 

be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its 

terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or 

invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.

Summary of Contents for 04174

























Reviews: