Draper 04174, Manual

Page: 12 / 24

– 12 –
8. ASSEMBLING THE HEATER
8.1 HANDLE (04174) – FIG.1
− Align the holes in the upper housing with the
two holes in the handle.
− Insert and tighten screws securely with
screw driver.
8.2 WHEEL AND HANDLE (04175 &
04176) – FIG.2
− Slide axle
(6)
through wheel support frame
(8)
. Install wheel spacers
(5)
if provided.
Install wheels
(4)
on axle
(6)
.
− IMPORTANT: When installing wheels
(4)
,
point extended hub of wheels toward wheel
support frame
(8)
. Secure wheels onto axle
using split pins.
− Place cap nuts
(7)
on axle ends. Gently tap
with hammer to secure.
− Place heater on wheel support frame
(8)
.
Line up holes on fuel tank flange with holes
on wheel support frame
(8)
.
− Place handle(s) on top of fuel tank flange.
Insert screws
(1)
through handle(s)
(9)
, fuel
tank flange, and wheel support frame
(8)
.
Attach nut finger tight after each screw
is inserted.
− After all screws are inserted, tighten nuts firmly.
1
2
FIG.
FIG.
(3)
(2)
(5)
(4)
(6) (7)
(9)
(8)
(1)