Dranetz Encore 61000, Installation Manual

Page: 23 / 92

2-5
Chapter 2/ Controls, Indicators, and Connectors
Power input/
switch diagram
The power switch panel includes LED indicators, the On/Off power button, and power
input decal and connector. See input power diagram and description below.
Part Function
1
Power Indicator. LED will blink when power is turned on. The number of
blinks correspond to the number of modules installed.
2
On/Off Power Button. Push for on, push for off.
NOTE: The on/off power switch shuts the unit down, but allows the battery to
continue to charge even with the switch in the Off position.
3
Power input decal and connector. The decal provides information about input
power rating. Plug in the AC Adapter output cable into the input connector.
AC input power source is specified as follows:
• Voltage range, 90-265V ac.
• Frequency, 50/60Hz.
• Power Consumption, 10W.
See page 2-6 for the procedure on how to connect to an ac power source.
4
Ground LUG. Connect with suitable wire to earth ground conductor or
connection.
1
3
2
4
SF-204