Draminski Twist Grain pro, Instruction Manual

Page: 45 / 60

44
TG pro
21.01.2018
Settings
Number of averages
Temperature scale
Date & time
Temp. probes
5 7 a) Add probe – in order to add a probe and create
a catalogue for measurements, connect the probe
to the mini-USB port, enter the
Main menu / Set-
tings / Temperature probes / Add probe , enter its
name (navigate with arrows and confirm the high-
lighted signs with the
button), when the name
is ready, use the button, then the message
appears: ” Save name? ”, which should be accepted
with the button or rejected with the but-
ton, for example:
TG pro
21.01.2018
Temp. probes
Add probe
Rename
Remove the probe
21.01.2018 TG pro
Probe name
PROBE NO 1
< 0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
5 7 b) Rename – in order to rename previously saved
probe, enter the Main menu / Settings / Tempera-
ture probes / Rename, select the name you would
like to change with the arrows and accept with
the
button, enter a new name for this probe
(change with the help of the arrows and confirm the
highlighted signs with the
button When the
name is ready, use , then a message appears:
” Save name? ”, which should be accepted with the
button or rejected with the button
TG pro
21.01.2018
Temp. probes
Add probe
Rename
Remove the probe
TG pro
21.01.2018
Rename
PROBE NO 1
SILO FOR CANOLA
TG pro 21.01.2018
Probe name
< _ 0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
5 7 c) Remove the probe – in order to remove the probe
with its measurements, enter the Main menu / Set-
tings / Temperature probes / Remove the probe ,
CHAPTER 11 | MAIN MENU