Draminski Twist Grain pro, Instruction Manual

Page: 23 / 60

22 CHAPTER 6 | HUMIDITY MEASUREMENTS
In order to perform grain moisture measurements:
a) turn on the device with the help of button, after
a greeting message a list of available species appears
(the TG pro displays the last tested grain species as soon
as it is turned on),
b) with the help of or buttons, select (highlight)
the name of the species which you are going to test and
then confirm with the
button,
TG pro
Choose species
Canola
Common wheat
Variety wheat
Rye
TG pro
Canola
Esc Start
Pour in sample
tighten the cap
c) in accordance with the message, fill (to the edge) the
measuring chamber with the tested grain,
d) fix the tightening cap on the thread of the measuring
chamber until you hear a sound made by the cap This
sound means that the force of the tightening is correct
However, in order to save the battery of the cap you
need to untwist it slightly until the signal disappears
(
NOTICE:
In the case of too soft grain the cap may not
produce and sound Then you need to twist it to the
end of the thread, but never add any grain),
e) when the grain is properly pressed, start the measur-
ing (function ”
Start
”) with the help of the but-
ton ( NOTICE: When the display shows the message
” Analysing... ” do not touch the measuring chamber),
TG pro
Analysing...
Canola
f) In a few seconds the display will show the moisture
percent result (%) and the temperature of the sample
(°C or °F depending on the user’s settings),
TG pro
22.1 0C
9.9%
Canola
Esc Start