Draminski TG pro coffee, Manual

Page: 20 / 60

19
EN
– In order to be able to store measurements from an ex-
ternal temperature probe in the device’s memory, it is
necessary to activate the advanced operating mode
and give the probe its own name in the settings (this is
necessary so that the results can be put in a directory in
a proper way) .
– In case of major deviations of the results of a given spe-
cies consisting in overestimating or underestimating the
results by a similar value within the whole measurement
range in relation to the laboratory method (moisture
balance), a result modification should be applied (see
section: MODIFICATION OF HUMIDITY RESULTS) .
– Each species has a different range of measured moisture
content, while exceeding it is indicated by a correspond-
ing sign, e .g .
“ <8.5% ” (below the range) when the moisture content
of the tested sample is lower than 8 .5%,
“ >35.0% ” (above the range) when the moisture content
of the tested sample is higher than 35% .
SECTION 5 | NOTES TO THE MEASUREMENTS