Drake Systems DTH-3002R, User Manual

Page: 4 / 10

“NO CHIRP MODE”, the car acts the same way above, but without chirp.
2-2-2. The car memorizes the status of intrusion ( door open )in the arm mode
and alerts it when the car is disarmed. The car alerts 4 times light flashing and 4
times chirps. The remote controller shows 4 times of green LED and
long beeps. The car alerts 3 chirps and 3 light flashing for the triggering
of shock sensor during arm mode.
2-3. CAR FIND
When the button “AUX” is pressed shortly, the remote car shows audible beep and
visual lighting. The remote controller shows flashing of green LED and sounds
short beep four times.
2-4. PANIC (FOR YOUR PERSONAL SAFETY )
When the button “LOCK” or “UNLOCK” is pressed more than 2 seconds,
the car will start alarming and flashing for 45 seconds. The panic can be
removed by pressing any button and it is helpful for your personal safety.
2-5. TRUNK OPEN
Pressing the button “ASTERISK” for more than 2 seconds can open
the trunk of the car. At that time, the remote controller flashes green LED 5 times
and sounds short beep 5 times.
2-6. VALET MODE
Valet mode is used to prevent from alarm system arming or triggering.
The alarm should be put into valet mode when the vehicle is being serviced.
Press the button ”AUX” more than 2 seconds during the car key is in the
position of “ACC” in the key box, then VALET mode is activated.
At the VALET mode, the LED on the base communication module turns ON
continuously
and the remote controller turns on green LED and sounds one dual beep. And also
the car alerts audible chirp with visual light flashing. Now the car is
in VALET mode. Only “LOCK” “UNLOCK” & “AUX” can be activated.
Even though the “LOCK” is activated, the car does not enter into ARMING during
VALET mode.
As the VALET mode is toggle function, the car can be return to the DISARM mode
when the button “AUX” is pressed once again at the same condition.
When the VALET mode is removed and returns to the DISARM mode,
the car alerts audible chirp with visual light flashing.
And the remote controller shows the green LED flashing and 2 times dual beeps.
2-7. PROGRAMMABLE FUNCTIONS
There are 4 programmable functions for the operation of the caralarm system.