43
42
DV1A150 / DF1A150 / DV1A160-CB / DF1A160-CB / DV2A311 / DF2A311
DV2A310 / DF2A310 / DF2A31 / DV2A313 / DF2A313
DF2A32 / DF2A33*
DVDC40 / DFDC40
All of the central vacuum system models in this manual are equipped with an electrical cord. An adequately
powered electrical outlet must be installed near the unit.
A dedicated electrical circuit must be used for
the unit and one for each booster head.
Refer to the next page for a detailed diagram of the appropriate
connections for your model.
CONNECTION PROCEDURE
• Install the 24V wires from the network (each
wall inlet) to the unit.
• If your unit includes one or several booster
heads, 24V wires must be connected to each
head as illustrated on the following page (refer
to the diagram of your specific model).
• Connect the unit to the electrical outlet with the
power-supply cord.
• The vacuum cleaner is now ready to be used.
EXAMPLES OF PROPER AND IMPROPER INSTALLATIONS
24V wires
ELECTRICAL POWER SUPPLY
DIAGRAMS OF AN APPROPRIATE CONNECTION
15 amp circuit / 108V - 120V
16 amp circuit / 220V - 240V
20 amp circuit / 108V - 120V
16 amp circuit / 220V - 240V
Electrical Panel
Electrical Panel
16 amp circuit / 220V - 240V
24V wires
24V wires
Electrical Panel
15 amp circuit / 108V - 120V
16 amp circuit / 220V - 240V
24V wires
24V wires
Electrical Panel
ELECTRICAL POWER SUPPLY
If you experience voltage surge problems on your electrical circuit in spite of adequate connections, a high
magnetic circuit breaker can be installed on your electrical panel. Contact an electrician for more information.
