48
Finalizing the Installation
(for qualified installers only)
Travis Industries
4101014
100-01257_000
4
Locate the exhaust restrictor on the firebox ceiling. Remove the two screws holding it in place and
place the restrictor aside.
5
Remove the two side fireback clips from the firebox ceiling. They are located at the outward edges of
the firebox near the glass opening.
The side fireback clip
has a keyhole slot. It
can be removed by
loosening the screw
and sliding the clip out.
6
Hold the rear fireback at an angle and position it behind the burner against the back wall of the
firebox. While holding it in place, install the side fireback as shown below.