Supplement Zeus
Infinity Empowered
19
English
2
Put on cap (C).
At the end of the cycle, proceed as follows:
1
Remove the cap (C) from the TurboVent 2
blower module.
2
Release the lock (D). Remove the TurboVent 2
blower module.
3
Check all components for visible soiling.
4
Repeat the cycle, if necessary.
5
If necessary, fix the cap (C) on the holder (E)
Drying the TurboVent 2 blower module
The TurboVent 2 blower module can be dried using
the following methods:
1
Remove the remaining liquid from the
TurboVent 2 blower module.
2
Position the TurboVent 2 blower module (F)
with the openings facing downwards until no
liquid is left.
– Place the TurboVent 2 blower module in a
drying cabinet for 3 hours at 60 °C (140 °F).
Or
– Dry the TurboVent 2 blower module on a
grid for 24 hours at room temperature. The
grid allows air circulation.
At least 30 reprocessing cycles are possible.
Performing reprocessing
1
Select a cycle.
2
When the cycle has ended, check the
components for visible soiling and repeat the
cycle if necessary.
3
Check the components for visible damage and
replace if necessary.
105
070
C
D
C
E
072
F