Dräger X-dock 5300, Technical Manual, Page: 15 / 28

Use
Dräger X-dock 5300/6300/6600 15
Test passed, with restrictions:
The status means that partial tests of the favourite could not be
performed because of special settings.

Confirmation is shown on the display.

The Status LED flashes yellow.

If required, select the desired instrument field for additional
information.

Remove the instrument from the module.
Test not passed:

An error message is shown on the display.

The Status LED flashes red.

If required, select the desired instrument field for additional
information.

Identify and rectify the error.

Repeat the test if necessary.
Overview of status LEDs
5.6 After use
1. If required, remove instruments from modules.
2. Close the test gas cylinders.
Colour Status Meaning
blue flashing Process in progress
green flashing Test passed
yellow flashing Test passed, with restrictions
red flashing Test failed/cancelled
X-am 5000
X-dock 5300
0 0
01133286.eps
X-am 5000
X-dock 5300
0 0
01133286.eps
NOTICE
To keep energy consumption low, Dräger recommends
switching off the equipment after use according to the
Instructions for Use.
i i