Dräger RW82, Instructions For Use Manual, Page: 66 / 126

PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
4 - 4
21. Secure the lower rear cover (O) to the upper post using
the six #10-32 x ¾" white screws (P).
22. Secure the upper rear cover (Q) to the upper post using
the four #10-32 x ¾" white screws (R).
23. Install the two #10-32 x 2.6" cross head screws (S)
through the two #10 lockwashers, the rear handle (T),
and the two spacers to secure the rear handle to the
lower rear cover.
24. Connect the line cord to the power connector (U) on
the rear of the controller.
CAUTION:
To prevent removal of the controller chassis with
the AC power switched on, secure the line cord to
the back cover. Failure to do so could result in
equipment damage.
25. Install the #8-32 x 3/8" screw and the cable clamp (V)
provided to secure the line cord to the lower rear cover.
O
P
Q
R
T
S
U
V