60
Technical Manual
|
Dräger Polytron
®
8000 Series
Instrument settings
12 Instrument
settings
12.1 Setting
passwords
1. Select
Settings
>
Instrument
>
Passwords
the desired password and confirm.
2. Select the line for editing the password and confirm.
3. Set the password and confirm.
4. Select
Confirm
and confirm with [OK].
12.2
Setting date and time
1. Select
Settings
>
Instrument
>
Date and time
and confirm.
2. Select the line for editing the date or time and confirm.
3. Select
Confirm
and confirm with [OK].
12.3 Setting
language
1. Select
Settings
>
Instrument
>
Language
and confirm.
2. Select a language from the list and confirm
12.4
Configuring function key
1. Select
Settings
>
Instrument
>
Function key
and confirm.
2. Select a function and confirm.
12.5
Resetting to default settings
This function resets the instrument to factory default settings.
1. Select
Settings
>
Instrument
>
Device init
and confirm.
2. Select
Confirm
and confirm with [OK].
Calibration PWD
Access to zero and span calibration
Settings PWD
Access to all configuration parameters
Graph
The measurements of the past 15 minutes are displayed
as a time/concentration graph.
Faults
Fault messages are displayed in plain text.
Warnings
Warning messages are displayed in plain text.
Bump test
The bump-test allows applying gas to the sensor without
generating an alarm. The maintenance signal is transmit-
ted. After 15 minutes or tapping [OK] again ends the
bump test and the instrument returns to normal opera-
tion.
Sensor vitality
1)
1) Only with diagnostic dongle
Shows the remaining sensor vitality.
