3
For Your Safety
For Your Safety
Strictly follow these Instructions for Use
Any use of this gas transmitter requires full understanding of the information
provided and strict adherence to the instructions given.
The gas transmitter is only to be used for the purposes specified here.
Maintenance
Maintenance jobs may only be carried out by trained service personnel.
We recommend signing a service contract to have all maintenance jobs carried out
by Dräger.
Always use original Dräger parts for maintenance.
Be sure to read the information provided in the chapter "Maintenance".
Accessories
Only use accessories mentioned in the order list.
Safe Connection of Electrical Devices
Never connect this device to other electrical devices not mentioned in these
Instructions for Use before consulting the manufacturer or an expert.
Use in Potentially Explosive Atmospheres
Devices or components used in potentially explosive atmospheres after being
tested and approved according to national, European or international regulations
may only be used under the conditions specified in the approval and under
observation of relevant legal regulations.
Never modify the electrical equipment.
Never use defective or incomplete parts. Always take relevant regulations into
account when repairing devices or components.
Safety symbols used in these Instructions for Use
These Instructions for Use contain a number of warnings for risks and hazards
which might occur when using the instrument. These warnings contain signal words
which will alert you to the degree of hazard you may encounter. These signal words
and corresponding hazards are as follows:
WARNING
Explosion hazard! Do not open sensor housing. There is a risk of ignition in
explosive atmospheres. The sensor housing contains live parts. Unauthorised
opening can lead to a safety-related failure of the sensor. The sensor does not
contain any parts that can be serviced by the user.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, could result in
physical injury, or damage to the product or environment. It may also be used to
alert against unsafe practices.
NOTICE
Indicates additional information on how to use the product.
Summary of Contents for PIR 3000
