Dräger Multi-PID 2, User Manual

Page: 29 / 107

29
Using the Multi-PID 2
Display
The Multi-PID 2 has a graphic display for reporting detected concen-
tration and to guide you through configuration options. All functions
of the Multi-PID 2 will be reported on the display.
Graphic Display
The Multi-PID 2 uses an 8 line graphic display. The display will always
be used for reporting detected concentration. In order to accommo-
date the range of concentrations the Multi-PID 2 can detect, the
meter reading will be reported using one of two resolutions. A resolu-
tion of 0.1 ppm will be used for concentrations below 100 ppm, and a
resolution of 1 ppm will be used for concentrations above 100 ppm .
Figure 5 – Multi-PID 2 Display
The display reports instantaneous concentration at all times when the
pump is on. In Interval mode, the display will report instantaneous
concentrations as well as REAL, STEL or TWA.
The Multi-PID 2 is designed for ease of use with a logically organized
internal menu structure/user interface.
The Multi-PID 2 User Menu is shown in Figures 6 and 7.
The Multi-PID 2 has three soft keys under the graphic LCD display,
which always show the available functions of the soft keys in any
screen.
Multi-PID 2
ALARM CHARGE
0
11
23958_0
1
_en.eps
view clear menu
9/3/2006 10:09
: 0.0
: 2.9 STEL
PEAK
PPM
: 0.1
0:05
TWA
INT
1.0