Dräger Multi-PID 2, User Manual

Page: 79 / 107

79
Routine Maintenance
Battery Pack Care
Leaving the Multi-PID 2 for more than 3 months without charging the
batteries may result in the loss of recorded data and setup parame-
ters. If the Multi-PID 2 is not used for long periods of time, recharge
the battery for a few hours every 30 days to avoid loss of data. See
Battery Charging on page 26 for instructions on charging the battery.
Please observe the following:
● For replacement battery pack use only Part No. 83 23 622 or
83 17 670.
● This battery pack must be disposed of properly. Check with local
codes for special disposal instructions.
● Do not open or mutilate the battery pack.
● Charge the battery pack using the AC adapter provided with or
identified for use with this product only in accordance with the in-
structions and limitations specified in this manual. For AC adapter
use only Part No. 64 05 428 (North America) or Part No.
83 17 661 (Europe).
WARNING:
Do not dispose of the battery pack in a fire. The cell
may explode!
WARNING:
Exercise care in handling battery packs in order not
to short the terminals with conducting materials
such as rings, bracelets and keys. The battery or
conductor may overheat and cause burns.