Supplement for Infinity CentralStation Wide
16
Supplement
–
Infinity CentralStation Wide
–
VG2.1.2
– Under
Parameter order
select a pre-configured template or select
Follow bed
(refers to the order
of the waveform and parameters as displayed and sent by the bedside monitor).
– Under
Bottom
, select
Waveform
or
Parameters
. Selecting
Parameters
displays a total of 3
parameter boxes in the lower channel for
Split screen
,
or a total of 4 parameter boxes for
Full
screen
.
7
Select
Apply
at the bottom of the screen to save the current configuration, or select
Undo
to cancel
changes.
8
Repeat steps 3 to 7 to customize
Layout 2
,
Layout 3
, and
Layout 4
.
9
To activate a layout that you created, select
Layouts...
from the main menu bar.
10
In the
Layouts
dialog, select the desired layout, and click
Apply
.
Password protection
To allow access to the Main screen layout tab without a password, perform the following steps.
1
Select
System setup...
on the main menu bar.
2
Select the
Biomed
tab.
3
Select the
Passwords
tab.
4
Select
Off
next to
Main screen layout password.
5
Select
Apply
.
Customized viewport layout
1
Select
Main screen
on the main menu bar.
2
Select the
menu icon for the patient bed that you want to customize
3
Select
Change patient parameters
to display the
Customize layout for:
dialog for the selected bed.
Beds
Parameters
1-2
Up to 8
3-4
Up to 4
5-6
Up to 3
7-8
Up to 2
NOTE
The triangle
indicates that the patient
viewport is customized.
