© 2014 Draeger Medical, Inc.
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
|
24
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
ECG Menu Options
TO SELECT ARRYTHMIA LEADS FOR PROCESSING AND ADJUST
SCALE FOR AN M300 PATIENT
1.
Open the
BedView
page by selecting the viewport of the te-
lemetry patient on the ICS Main screen.
2.
Select the
Telemetry/Parameters
.... button on the Bedview
menu bar.
3.
Select the
Layout/Parameters
tab.
4.
Select the
Layout
tab.
5.
Select the arrow of appropriate channel and choose desired
lead for
QRS/ARR processing
in channel 1 or 2 in the Wave-
form column.
6.
Select the
Gain/Scale
arrow to increase or decrease the wave-
form size.
7.
Select the
Apply
button.
TO SELECT PACER DETECTION FOR AN M300 PATIENT
1.
Open the BedView page by selecting the viewport of the te-
lemetry patient in the ICS Main screen.
2.
Select the
Telemetry/Parameters
.... button on the Bedview
menu bar.
3.
Select the
Layout/Parameters
tab.
4.
Select the
ECG
tab.
5.
Select
Pacer Detection On/Off
as appropriate. Select Fusion if
available and clinically appropriate.
6.
Select
Apply
.
TO CHECK LEAD PREP, BATTERY STRENGTH & SIGNAL STRENGTH
FOR AN M300 PATIENT
1.
Open the BedView page by selecting the viewport of the te-
lemetry patient on the ICS Main screen.
2.
Select the
Telemetry/Parameters
.... button on the Bedview
menu bar.
