© 2014 Draeger Medical, Inc.
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
|
22
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
2.
Then select this button. For M300 patients this will also mark
an event.
3.
Press
Stop
button on
Recorder
to stop any recording while in
process.
OR
4.
Select the
Record
button symbol from the patient’s Main
screen viewport to stop recording.
TO CONFIGURE INDIVIDUAL PATIENT ALARM LIMIT SETTINGS
1.
Open the BedView page by selecting the viewport of the pa-
tient on the ICS Main screen.
2.
Select the
Alarms…
button in the menu bar of the patient’s
BedView page.
3.
Select the
Limits
tab.
4.
Select the corresponding button in the
Alarm
on/off column to
activate or deactivate alarm monitoring. When an alarm is
turned off the following symbol appears:
5.
Select the corresponding button in the
Lower & Upper
col-
umns to adjust the lower & upper alarm limits.
6.
Select one of the following settings in the
Archive
column to
determine response to an alarm:
o
Off
: no event is stored and no recording is generated.
o
Store
: stores the event in the disclosure database.
o
Record
: generates a strip recording. Store/Rec: stores the
event in the disclosure database and generates a strip re-
cording.
7.
Repeat steps 4 through 6 for each parameter to be configured.
8.
Select the
Apply
button.
TO CONFIGURE INDIVIDUAL PATIENT ARRHYTHMIA ALARM
SETTINGS
1.
Open the BedView page by selecting the viewport of the pa-
