14
Dräger Flame 3000
3.3
Commissioning and functional testing
1. Switch on the Dräger Flame 3000.
NOTICE
When switched on, the Dräger Flame 3000 will perform an
internal test and system initialization that takes approximately
five seconds.
2. Test the Dräger Flame 3000 using a flame simulator (refer to the
flame simulator instructions for details; Dräger recommend the
Dräger FS-5000). The status LED will turn red when it detects the
simulated flame.
Failure of the Dräger Flame 3000 to respond to the flame simulator
should be reported to Dräger.
i
i
Use
Summary of Contents for 420 94 60
Page 2: ......
