background image

4

Dräger Flame 3000

For your safety

1.1 

General safety statements

 

Before using this product, carefully read the Instructions for Use.

• 

Strictly follow the Instructions for Use. The user must fully understand 

and strictly observe the instructions. Use the product only for the 

purposes specified in the Intended Use section of this document.

• 

Do not dispose of the Instructions for Use. Ensure that they are 

retained and appropriately used by the product user.

• 

Only fully trained and competent users are permitted to use this 

product.

• 

Comply with all local and national rules and regulations associated 

with this product.

• 

Only trained and competent personnel are permitted to inspect, 

repair and service the product as detailed in these Instructions for 

Use (see Section 5). Further maintenance work that is not detailed 

in these Instructions for Use must only be carried out by Dräger or 

personnel qualified by Dräger. Dräger recommend a Dräger service 

contract for all maintenance activities.

• 

Use only genuine Dräger spare parts and accessories, or the proper 

functioning of the product may be impaired.

• 

Do not use a faulty or incomplete product, and do not modify the 

product.

• 

Notify Dräger in the event of any component fault or failure.

1.2 

Special and product-specific safety 

statements

• 

This product is approved according to ATEX directive 

2014

/

34

/E

U

.

It must

 

only be used under the conditions specified in the approval certificate.

• 

Ensure that all site permits, procedures and practices are followed 

when installing, using and maintaining the product.

1.3 

Definitions of alert icons

Alert icons are used in this document to provide and highlight text that 

requires a greater awareness by the user. A definition of the meaning 

of each icon is as follows:

WARNING

Indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not 

avoided, could result in physical injury or damage to the 

product or environment. It may also be used to alert against 

unsafe practices.

NOTICE

Indicates additional information on how to use the product.

!

!

i

i

For your safety

Summary of Contents for 420 94 60





















Reviews: