Dräger Medical Narkomed MRI-2, Operator'S Instruction Manual, Page: 121 / 178

Respiratory Volume Monitoring 12
12-5
Part Number: 4116841-001 Rev: E Narkomed MRI-2 Operator’s Manual
Setting the Minute Volume Low Alarm Limit
If the low minute volume falls below the minute volume low alarm limit,
an alarm condition occurs. The alarm limit is automatically set to a default
of 1.0 liter/min. at power-up. You can change the default to a value within
the range of 0.2 liters/min. to 10.0 liters/min.
Follow these steps to adjust the minute volume low alarm limit:
1. Press the Breathing Volume Low Limit key.
A box is drawn around the minute volume low alarm limit.
2. Press the up arrow or down arrow key to increase or decrease the
highlighted alarm limit.
3. To save the new value, stop pressing arrow keys until the highlighting
box disappears (5 seconds), or press a different alarm Limit key.
The new value is saved as the alarm limit.
Turning Respiratory Volume Alarms Off
To turn off the respiratory volume alarms, press the Breathing Volume Off
key.
The alarms stop sounding and their messages are erased from the display.
In addition, the LED next to the Breathing Volume
Off key lights to
indicate the Off condition.
Turning Respiratory Volume Alarms On
To turn on the respiratory volume alarms, press the Breathing Volume On
key.
The LED next to the Breathing Volume
On
key lights to indicate that the
volume alarms are enabled.
NOTE: After power-up, the volume alarms are in standby.
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS