DR RAPID-FEED 16.50 PRO, Safety & Operating Instructions Manual

Page: 20 / 80

Attaching the Hopper Assembly
NOTE: We recommend that you have someone help you lift the
Hopper in place and support it until it is secured to the Chipper.
Hopper
Assembly
Hopper
Hardware
Tools Needed:
•
Two 1/2" Wrenches
1. Attach the Hopper Assembly to the Chipper with six
5/16"-18 x 1" Bolts, twelve Flat Washers (one Washer
on Bolt side and one on Lock Nut side) and six Nylon
Lock Nuts (
Figure 7 ).
NOTE: Install hardware with Bolt Head on the top side.
Figure 7
Attaching the Discharge Chute
Tools Needed:
Discharge
Chute
Figure 8
Bolts and
Locknuts
Tongue
Assembly
Hardware
Figure 9
Hitch
Plate
•
Two 1/2" Wrenches
1. Position the Discharge Chute as shown and secure
with two 5/16-18 x 5-1/4" Bolts and Nylon Locknuts
(
Figure 8 ).
Attaching the Hitch Plate
Tools Needed:
•
Two 1/2" Wrenches
1. Position the Hitch Plate onto the Tongue Assembly as
shown and secure with two 5/16-18 x 1" Bolts and
Nylon Locknuts (
Figure 9 ).
16 16.50 PRO
DR
®
RAPID-FEED™ CHIPPER