DR 48" LANDSCAPE RAKE, Safety & Operating Instructions Manual

Page: 6 / 16

6
DR
®
48" LANDSCAPE RAKE
Specifications
Assembling the DR 48" Landscape Rake
Parts Supplied in Hardware Bag (Figure 2):
Item # Part # Description Qty
1 ............. 40945 .............. Bolt, Hex, M24 X 100 ................................. 1
2 ............. 40971 .............. Bolt, Hex, M18 X 90 .................................... 1
3 ............. 40955 .............. Bolt, Hex, M12 X 70 .................................... 5
4 ............. 40942 .............. Bolt, Hex, M12 X 40 .................................... 4
5 ............. 40961 .............. Bolt, Hex, M16 X 45 .................................... 1
6 ............. 40946 .............. Washer, Flat, M24 ....................................... 2
7 ............. 40972 .............. Nut, Nylon Lock, M18 ................................ 1
8 ............. 40948 .............. Bolt, Carriage, M10 X 30 ............................. 24
9 ............. 40943 .............. Nut, Nylon Lock, M12 ................................ 9
10 ........... 40962 .............. Nut, Nylon Lock, M16 ................................ 1
11 ........... 40947 .............. Nut, Nylon Lock, M24 ................................ 1
12 ........... 40952 .............. Nut, Nylon Lock, M10 ................................ 24
13 ........... 40976 .............. Washer, Flat, M20 ....................................... 2
14 ........... 40977 .............. Pin, Cotter, 4 X 50 ....................................... 2
15 ........... 40954 .............. Pin, Retaining .............................................. 2
16 ........... 40953 .............. Pin, Hitch..................................................... 2
Compare the contents of the Hardware Bag with the “Parts Supplied” list above.
If you have any questions please contact us at www.DRpower.com or call 1-800-
DR-OWNER (376-9637) for assistance.
Tools Needed:

17mm Wrench

18mm Wrench

Two 19mm Wrenches

Two 24mm Wrenches

Two 27mm Wrenches

Two 36mm Wrenches
1.
Install the Wheels to the Axle Frame, with the Valve Stems facing out, using
the M20 Flat Washers and Cotter pins (Figure 3).
2.
Install the Height Adjustment Plate onto the Axle Frame so that it is
pointing forward (away from the Wheels) using three M12 X 70 Hex Bolts
and Locknuts. Tighten the hardware using two 19mm Wrenches.
3.
Position the Frame so that the Pivot Disc is on the Bottom (Figure 4).
Install the Tow Bar to the Frame so that it is angled down using four M12 X
40 Bolts and Locknuts. Tighten the hardware using two 19 mm Wrenches.
4.
Install the Axle Assembly to the rear of the Frame using the M18 X 90 Bolt
and Locknut. Use two 27mm Wrenches to tighten the Hardware. Do not
over tighten; the Axle Assembly should be able to rotate freely.
Tine QTY 24
Wheels Pneumatic, 12" Diameter
Working Width 48"
Hitch Type Pin
1
6
11
2
9
13
3
5
10
4
7
8(24X)
14
16
12(24X)
15
Figure 2
M20 Washer
Cotter Pin
Height Adjustment Plate
pointing forward
Bolts
Locknuts
Axle
Frame
Wheels
Figure 3
Axle
Assembly
Frame
Tow Bar
M12 Bolts
M12 Locknuts
M18 Locknut
M18 Bolt
Pivot Disc
on Bottom
Figure 4